To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección
de apoyo en:
www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur:
www.gpx.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.gpx.com
Customer Service:
1-888-999-4215
| Email Support:
| Email Parts:
Copyright © 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective
owners. Specifications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Clock
To Set the Clock Manually
1. With the radio off, press and hold the
Time Set
button until the display begins flashing.
2. Press the
Hour/Min
buttons to adjust the time. Note the
PM indicator
.
3. Press the
Time Set
button again to finish.
Alarm and Sleep Timer
Setting the Alarm
1. With the radio off, press and hold the
Alarm Set
button to set the time for Alarm 1 or/
and Alarm 2.
2. The display will flash and show the time the Alarm 1 is set to go off. Press the
Hour/Min
buttons to adjust the time. Note the
PM indicator
.
3. Once you have set your desired time, press the
Alarm Set
button to confirm.
4. After the alarm time is set, select the alarm type (Buzzer or Radio) by pressing the
Hour/
Min
buttons.
5. Press
Alarm Set
to confirm.
6. Then the display will flash and show the time Alarm 2 is set to go off. Press the
Hour/
Min
buttons to adjust the time. Note the
PM indicator
.
7. Once you have set your desired time, press the
Alarm Set
button to set.
8. After the alarm time is set, select the alarm type (Buzzer or Radio) by press the
Hour/
Min
buttons.
9. Press
Alarm Set
to confirm.
FM Radio
The clock radio is equipped with an FM wire. To improve radio reception, adjust the FM wire of
the clock radio.
Tuning the Radio
1. Press the
Power
button to power the clock radio ON, then press again to select
FM
Mode.
2. Press the
/−
buttons to adjust the radio to the desired frequency.
3. Press and hold the
/−
buttons to scan for available frequencies.
4. Press the
/−
buttons to adjust the volume.
5. Press the
Power
to turn the radio off.
Voice Assistant
When your mobile phone is connected to the clock via Bluetooth, you can use voice assistant.
1. Pair your phone to the clock (see Bluetooth section above).
Note:
If using an
iPhone, access your Bluetooth settings menu, select CB360 and turn on
"Show Notifications" this is the only way to synch your iPhone's time to
the clock.
2. The clock's time will automatically update to the time on the connected phone and the
voice assistant may be used.
Disabling the Alarm
•
Press the
Alarm Set
button until the alarm indicator is no longer lit.
Snooze and Alarm Reset
After the alarm sounds:
•
Press the
Snooze/Sleep
button to delay the alarm for 9 minutes.
•
Press the
Power
button to turn the alarm off until the set alarm time is reached again.
Setting the Sleep Timer
1. Press the
Sleep
button repeatedly to set the sleep timer.
Timer duration is displayed in
minutes.
2. Once the set sleep time has expired the alarm will sound, then the unit automatically
power off.
Saving Radio Presets
1. Tune to the desired FM frequency (see above steps).
2. Press and hold the
Preset
button. The display will begin flashing a preset.
Ex: "P01".
3. Press the
/−
buttons to select the preset to be saved.
(P01 to P10).
4. Press the
Preset
button to save that preset.
5. With the radio ON, press the
Preset buttons
to cycle through radio presets to cycle
through radio presets.
Power, Battery Backup, and Charging
To power the unit, plug the AC/DC power adapter (included) into the DC power port on
the rear of the unit and a standard AC power outlet.
Battery backup is used to save the time on the clock, in the event of a power failure.
Requires 2 AA batteries (not included).
Charge a phone or mobile device using a USB charging cable (not included) and connect it to
the USB charging port on the rear of the unit.
Note:
this USB charging port is not suitable for
charging tablets.
Power output: 5V 1A only.
Bluetooth Wireless
Pairing to a Bluetooth Device and Playing Audio
1. When powered on, the clock will automatically enter into
Bluetooth mode
.
The symbol on the display will begin flashing and a voice prompt will
sound from the speaker.
When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select
CB360
from your
Bluetooth settings to pair. When successfully paired, the symbol on the
display will turn solid and a voice prompt will sound.
You can refer to the
user’s manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
3. Audio played through the connected Bluetooth device should now be heard
through the speakers. Use the controls on the connected Bluetooth device to
select and begin playing audio. Play, pause or skip audio using the controls
on the connected device.
4. After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. Note: If your device should
become unpaired or you find it is unable to connect, press & hold the
Play/Pause/Pair
button to enter into Pairing Mode. A voice will announce
“Bluetooth is connecting” and you can connect to the speaker manually.
5.
Note: The clock time will automatically be updated to match your
phone's time when connected. If using an iPhone, access your Bluetooth
settings menu, select CB360 and turn on "Show Notifications" to synch
your phone's time to the clock.
