settInG the CLoCk
oPeratIons
ControLs
ControL GLossary
settInG the aLarM
█
Press and hold the
1.
aL Button
.
While holding the
2.
aL Button
, press the
hr Button
to
adjust the hour, and the
MIn Button
to adjust the minute.
A PM Indicator Light will illuminate green when the time is
in the PM.
While continuing to hold the
3.
aL Button
, press the
aL
Mode Button
to set the alarm mode to
BU (
Buzzer
), RU
(Radio),
or
Off.
After the correct time is set, release the
4.
aL Button
to finish
setting the alarm.
After the alarm sounds, press the
•
snooze Button
to delay
the alarm for an additional 9 minutes.
After the alarm sounds, press the
•
Power/aL off Button
to
turn the alarm off until the set alarm time is reached again.
settInG the sLeeP tIMer
█
Press and hold the
1.
sleep Button
.
While holding the
2.
sleep Button
, press the
hr Button
to increase the hour, and the
MIn Button
to decrease the
minutes.
The maximum sleep time is 1 hour 59 minutes.
After the sleep time is set, release the
3.
sleep Button
to finish
setting the sleep timer.
At anytime, you can check the remaining sleep time by
pressing and holding the
Sleep Button.
tunInG the aM/FM raDIo
█
Press the
1.
Power/aL off Button
to turn the radio on.
Turn the volume up to see if the unit is turned on or off. If
static or the radio plays, then the unit is turned on, if not,
then the unit is powered off.
Adjust the
2.
FM/aM switch
to AM or FM.
Turn the
3.
tuning Dial
to the desired station.
Turn the
•
volume Dial
adjust the volume of the unit.
To set the sleep timer when in
•
Radio Mode
, follow the
“Setting the Sleep Timer” instructions.
When the Auxiliary Input is connected to an Audio Source,
•
that source will override the radio.
usInG the auxILIary InPut
█
Plug an MP3 Player or other Audio Source into the
1.
auxiliary Input
on the back of the unit.
Press the
2.
Power/aL off Button
to turn the unit on.
Turn the volume up to see if the unit is turned on or off. If
static, the radio, or the connected audio source plays, then
the unit is turned on, if not, then the unit is powered off.
When the Auxiliary Input is connected to an Audio Source,
•
that source will override the radio.
abbr.
Full name
time Zone
a-1
AST
Atlantic Standard Time
UTC - 4 hours
ADT
Atlantic Daylight Time
UTC - 3 hours
a-2
EST
Estern Standard Time
UTC - 5 hours
EDT
Eastern Daylight Time
UTC - 4 hours
a-3
CST
Central Standard Time
UTC - 6 hours
CDT
Central Daylight Time
UTC - 5 hours
a-4
MST
Mountain Standard Time
UTC - 7 hours
MDT
Mountain Daylight Time
UTC - 6 hours
a-5
PST
Pacific Standard Time
UTC - 8 hours
PDT
Pacific Daylight Time
UTC - 7 hours
a-6
AKST
Alaska Standard Time
UTC - 9 hours
AKDT
Alaska Daylight Time
UTC - 8 hours
a-7
HAST
Hawaii-Aleutian Standard Time
UTC - 10 hours
HADT
Hawaii-Aleutian Daylight Time
UTC - 9 hours
settInG the CLoCk usInG InteLL set™
█
Plug the attached AC Cord into an AC power source.
1.
The time will automatically be set to Eastern Standard Time.
2.
Press and hold the
3.
time Zone Button
, located on the back of the unit.
While holding the
4.
time Zone Button
, press the
MIn Button
to adjust the current time zone.
Refer to the Time Zone Chart to find your specific time zone.
ManuaLLy settInG the CLoCk
█
Press and hold the
1.
time Button
.
While holding the
2.
time Button
, press the
hr Button
to adjust the hour, and the
MIn Button
to
adjust the minute.
A PM Indicator Light will illuminate green when the time is in the PM.
After the correct time is set, release the
3.
time Button
to finish setting the clock.
2
1
3
4
8
10
9
6
7
5
11
12
13
14
17
16
15
sleep Button
01.
Press the Sleep Button to adjust the sleep timer.
Power/aL off Button
02.
Press the Power Button to turn the unit on.
After the alarm sounds, press the
Power/aL off Button
to
turn the alarm off until the set alarm time is reached again
volume Dial
03.
Turn the Volume Dial to adjust the volume of the unit.
time Button
04.
Press the Time Button to adjust the unit’s time.
hr Button
05.
Press the HR Button to adjust the hour of the time or alarm.
snooze Button
06.
After the alarm sounds, press the Snooze Button to delay the
alarm for an additional 9 minutes.
MIn Button
07.
Press the MIN Button to adjust the minute of the time or
alarm.
While holding the
time Zone Button
, press the
MIn
Button
to adjust the current time zone.
FM/aM switch
08.
Adjust the FM/AM Switch to select FM or AM radio.
time Zone Button
09.
Press the Time Zone Button to adjust the time zone.
auxiliary Input
10.
Use the Auxiliary Input to connect an MP3 player or other
audio source to the unit.
Dimmer Button
11.
Press the Dimmer Button to adjust the brightness of the
LED display
aL Button
12.
Press the AL Button to set the alarm time.
tuning Dial
13.
Turn the Tuning Dial to adjust the FM or AM radio station.
aL Mode Button
14.
Press the AL Mode Button to set the alarm mode to
BU
(
Buzzer
), RU (Radio),
or
Off.
Dst switch
15.
Adjust the DST Switch to “On” during Daylight Savings
Time to adjust the clock forward an hour.
Adjust the DST Switch to “Off” at the end of Daylight
Savings Time to adjust the clock back an hour.
FM wire antenna
16.
Adjust the FM Wire Antenna to improve the FM radio
reception.
An AM Antenna is built into the unit. Adjust the position of
the unit to improve AM radio reception.
aC Cord
17.
Use the attached AC Cord to connect the unit to an AC
power source.
C209.indd 2
3/13/2009 12:12:48 AM
