Operation
ffi
CAUTION!
Never touch brushes while operating - shock may occur.
Cleaning Cycle
The DM-2 comes with a factory preset cleaning cycle designed to clean the emitters once every day.
ffi
CAUTION!
High Voltage.
/4\
CAUTION!
This product is suitable for mounting to duct of metallic construction only. Installation must be such
�
that the structural integrity of the ducting is not compromised.
/4\
CAUTION!
Risk Of Electric Shock. Can Cause Injury Or Death: Disconnect All Remote Electric Power Supplies
�
Before Servicing. To Avoid Risk of Fire and Shock, Use Only Flexible conduit.
NOTE:
The health aspects associated with the use of this product and its ability to aid in disinfection of
environmental air have not been investigated by UL LLC.
Troubleshooting
1. Unit will not power up, no indicator light
a. Confirm proper voltage is applied to the correct terminal(s).
b. Remove power, wait 1 minute, and reapply power.
c. If no light is still displayed, try an alternate power source. If using 24v try using 120v or vice versa.
2. If the unit does not operate properly after verifying the above instructions contact GPS for additional assistance.
Product Registration
By registering your order, the standard limited warranty on eligible products from
your purchase is automatically extended to 3 years, at no additional cost.
Register your products at www.globalplasmasolutions.com/product-registration or
scan the QR code.
ID
REGISTER
