GPS-TEKNIK GT30X, Руководство пользователя

Страница: 10 / 20

W000000,011,CMNET
7.6.3 Set IP and Port
Command: W******,012,IP,Port
Description: Sets IP and Port for tracker for GPRS communication.
Notes:
1. IP is your server’s IP or the domain name.
2. Port: [1,65534]
Example:
W000000,012, 220.121.7.89,8500
W000000,012,www.xxxxx.net,8500
7.6.4 Set DNS Server IP (optional)
Command: W******,009,DNS Server IP
Description: In case the domain name you set by the last command (W******,012,IP, Port) doesn’t work,
which means your server IP is not properly set. You can first use this command to set DNS Server IP (please
check with your DNS server provider for the DNS Server IP) and then redo the command W******,012,IP,
Port.
Example: W000000,009,220.23.4.90
7.6.5 Enable GPRS Tracking
Command: W******,013,X
Description: Enables GPRS tracking function.
Notes:
X=0, to turn off GPRS tracking (default);
X=1, to enable GPRS tracking via TCP
X=2, to enable GPRS tracking via UDP
Example: W000000,013,1
7.6.6 Set GPRS Interval
Command: W******,014,XXXXX
Description: Sets time interval for sending GPRS packets.
Notes:
XXXXX should be in five digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS packet and in unit of 10 seconds.
In this example, the tracker will send every 600 seconds (10 minutes).
Example: W000000,014,00060
The tracker will send every 600 seconds (10 minutes).
For more information regarding GPRS tracking please refer to <GPRS Communication Protocol>
WWW.GPS-TEKNIK.SE
WWW.GPS-TEKNIK.COM
SOFTWARE@GPS-TEKNIK.SE FORUM - WWW.GPS-TEKNIK.EU
WWW.GPS-TEKNIK.SE
WWW.GPS-TEKNIK.EU
DEVELOPER@GPS-TEKNIK.SE FORUM - WWW.GPS-TEKNIK.EU