-----------------
IMPACT DOT-MATRIX RECEIPT PRINTER
------------------
-
- 4 -
Connection
Note: take 76NI with auto cutter for example, other models are similar.
a. Connect the adapter cable to power connector of the printer.
b. Connect the date cable to the connector on the rear panel of the printer.
c. Connect the cash drawer’s RJ-11 phone jack to the connector on the rear panel.
Installation of Paper Roll and Ink Ribbon
Please install after turn on the printer with indicators on.
a) Open the top cover.
b) Install the paper roll as the picture showing direction.
c) Insert the end of the bottom paper into the paper take-up spool, be sure that the
paper is aligned with the spool’s flange so that the paper is taken up by the spool.
d) Cut redundant paper by the cutter.
e) Open the printer’s cover, turn the knob five or six times in the direction of the arrow,
insert the ink ribbon, and push the ribbon cassette down until it clicks.
