Portable Thermal Printer
Safety warning
Safety notice
Only the supplied AC power adapter and lithium battery is allowed
to use, otherwise it may cause device damage, battery leakage, fire,
and even explosion.
Do not put the battery into a fire or apply direct heat to it or
disassemble it, otherwise cause the battery leakage, fire, and even
explosion.
Please remove the battery from the printer and store separately if
the printer will not be used for a long period of time, otherwise cause
the battery leakage.
As the battery’s liquid is corrosive, if there any case of operational
mistakes to cause leakage, please wash immediately with plenty of
clean water if skin or clothes contact it carelessly. If entering eyes,
wash with plenty of clean water at once and seek medical advice.
Do not touch the paper tear-off knife.
The print head is a heated part, please do not touch the print head
and other parts around it during or after the printing process.
Do not touch the print head and plug-in parts to avoid print head
damage.
Do not open the top cover when printing, otherwise may cause
printer
work failure.
In order to get good print quality, and extend the device service life,
we suggest
that using the recommended thermal paper roll or which
is the same quality of.
Do not print when it’s out of paper, which will seriously damage the
print head and rubber roller.
Make sure printer power is turned off when connecting and
disconnecting the power cable or data cable.
Do not let water or conducting material (eg. Metal) into the printer,
please turn off the power immediately if happened.
Please make sure to charge the battery for 60% or above and then
remove the battery from the printer and store separately if the printer
will not be used for a long period of time.
Please keep this manual for your reference.
Label & receipt printer 2-in-1.
Two kinds of Interface optional: USB+Bluetooth (standard ),
USB+WiFi (optional)
USB+Bluetooth: BT3.0 and BLE4.0, support Android and iOS system.
USB+WIFI: AP/STA/AP+STA mode to set up the networks.
Compatible with ESC/POS printing commands, support NV logo
download printing, various 1D bar code and QR code.
Low power consumption, good print quality, 50km mechanism lifespan.
Support GB18030 Simplified Chinese, Big5 traditional Chinese,
Korean, international character set and extended code pages.
LED can be showed abnormal condition of the printer, battery capacity
status, charging and connection status ect.
Freely offer DLL, SDK, Demo for developing.
Main Features:
After unpacking the unit, please check that all the necessary
accessories are included in the package.
Unpacking
1pcs
1pcs
1pcs
1pcs
1pcs
User’s manual
Printer
Lithium battery
USB cable
Power adapter
Print mode
Print method
Dot density
Print speed
Interface
Print width Max
Label size Max
Buffer
Print commands
Cover open detect
Paper sensor
Paper back-feed
Code
page
Barcode
Character fonts
Paper type
Paper width
Paper diameter
Paper cutting way
Lithium battery
Power adapter
Charge period
Work
Environment
Storage
Environment
Dimension
Weight
Mechanism
Label mode
60mm/s
(
max
)
60mm
/
s
Receipt printer
Direct line thermal
203DPI
USB+Bluetooth 4.0, USB+Wi-Fi
TSPL
ESC
Microswitch
Photo electricity
Not available
DRAM: 128KB FLASH:128KB
NV FLASH: 60KB
(Big5+Korean)/Japanese, ANK
Thermal paper roll
79mm
50mm
±
0.5mm
Top paper out, tear-off
7.4V 2200mAh
Input: AC220V output: DC 9V/1A
3h-5h
45~79mm
Adhesive thermal paper
131mm*107mm*58mm
430g (including battery)
50km
Temperature: 5
～
45
℃
, Humidity:
≤
93%
RH
Temperature: 5
～
50
℃
, Humidity:
≤
93%
RH
Portable Thermal Printer
Portable Thermal Printer
72mm 72mm
72mm*220mm
Unlimited
Technique Spec
