GPO RANGEGUIDE 2800, Инструкция по эксплуатации

Страница: 25 / 140

Single measurement
With the RANGEGUIDE 2800 switched on, use the target
marker to aim at the object to be measured and press the
measurement button
briefly. The direct distance is
displayed in the first line for 15 seconds. The device then
switches off automatically.
Continuous measurement / scan mode
To switch on the scan mode, press and hold the
measurement button . As long as you keep the button
pressed, the device will continuously measure the
distance to the target object and display the respective
distance to different objects.
If you release the measurement button , the current
measured value will be displayed for a further 15 seconds
as for the single measurement. The device then
automatically switches to standby mode and then
switches off after 15 seconds.
The direct distance, horizontal distance and angle display
are updated up to 4 times per second.
M 16835
IT
48 49
EN
48 49
Distance measurement
The distance measurement mode is switched on by
pressing the measurement button once and remains in
standby for 15 seconds.
Press the measurement button again
within
15 seconds to start the
measurement. The distance is displayed.
To preserve battery life, the instrument
switches
off automatically after 15
seconds of inactivity.
If the reflection from the object is not
sufficient
for the measurement, the
following display appears:
_ _ _ _ _ M/Y
Simply restart the measurement with a
new target.