GPO Display PA12H, Руководство пользователя

Страница: 5 / 16

User manual
www.gpodisplay.com Panoramic Display
5
OSD Controls
Button Function Status
LED Indicates operation status
Green : Normal Operation
Off : Off Mode
Green Blinking : No Signal
POWER Turn on or turn off the power
MENU
Display the OSD menu on no menu status
Exit a menu of sub-menu
SELECT Select highlighted function
DOWN
Select previous menu item
Decrease slider value
UP
Select next menu item
Increase slider value
Selecting Display Position
a. Panoramic Displays will accept signal resolutions with 4:3 and 16:9 aspect ratios. However, they
will only display the top one-third, two-fifths, or one-half of this signal, depending on the display
model. For example, when a 1920x1080 signal is sent to PA28H, the top half (1920x540) of the
image is displayed on the panel.
b. In order to change the display position, press the “down” directional button on the remote
controller four times in succession. This will toggle your view between the top and bottom
portions (half, third, or two-fifths) of the 4:3 or 16:9 content being displayed.
c. Signal resolutions equivalent to the displays’ native resolution is supported for all models.