www.gpodisplay.com
InteracTable
4
Quick Start Guide
After removing the
table
from its packaging, open
the cabinet by pushing the key button and pulling
outward.
The interior of the cabinetry is shown above. There is
an access hole at the bottom of the cabinet, through
which cabling can be run. The power cable for the
touch screen must be plugged either into the outlet
shown above or directly to an outlet below the table.
Above is a view of the cables in the cabinet. The
HDMI cable feeding the touch screen is shown
being held by a technician, while the USB is
circled in red. The USB must be connected to
your source device in order for touch functionality
to work.
If the touch screen’s power cable is plugged into
the outlet provided, you will then need to connect a
power cable to the exterior outlet, circled above.
You will need to turn the power switch located next
to the exterior outlet on after connecting your
source device.
