GPD WIN MAX 2, Руководство пользователя, Страница: 12 / 20

Charge the device
Charge the device with a power adapter
The device has a built-in (non-detachable) rechargeable battery. Please use the attached power adapter and charging
cable to connect the power socket. When the charging indicator lights red, it indicates that the battery is charging.
When the battery is full, the light turns green. When the device is off or in sleep mode, the battery will charge faster.
Precautions for charging
Please use the attached power adapter and charging cable to connect the power socket.
The use of third-party accessories may cause low performance, and there may be safety hazards.
Please charge the device at suitable temperature and in a well-ventilated and cool area.
Charging at a high temperature may damage the device.
The charging time of the device will vary with temperature and battery usage.
When the device is working and charging for a long time, the surface may become hot, which is normal. When
you feel hot, please disable some functions and stop charging.




Know the battery status
You can check the current battery status by the battery icon on the screen.
When the device is powered on, the battery icon will indicate that the device has been connected.
When the device is in use, move the cursor to the battery icon to view the remaining battery capacity and
remaining service time.
The battery is consumable. If it is found that the standby time is greatly reduced, please do not replace it by
yourself. Please contact the customer service staff of the shop where you purchased it to replace it with the original
battery.


Please connect the power adapter and charging cable to charge the device when first startup.
When the device is off or in sleep, short press the power button until the screen lights up. At this time, you can turn on or
wake up the device.
When the device is in normal use, click < to put the device into sleep, shutdown or restart state.
Press and hold the power button for 10 seconds to forcibly shut down the device. In case of forced shutdown,
unsaved data may be lost.
Turn the device on and off
21 22
Warning ..tatement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.