GB
Charging Condition
Standby
Charging
Fully charged
Abnormal condition
LED indicator
Green Flashes Once
Green Flashing
Green LED On
Red LED On
Read the instruction manual thoroughly before use.
Keep the manual for future reference.
Charging status / LED indicators
Usage tips
• For the wireless charging to function properly, make sure the center of the mobile device is aligned over the center of
the wireless charger.
• Wireless charging may not work properly if the case of the mobile device is thicker than 5mm. Remove it before charging.
• If the indicator light does not work properly, disconnect the wireless charger from the power source and reconnect it.
Specifications
• Input: DC 5V / 2A , 9V / 1.67A
• Output: Max. 10W
• Operating temperature: 0 °C (32 °F) to 30 °C (86 °F)
• Protection: Foreign body detection, over current, short circuit, over temperature, over voltage
• Dimensions: 84 x 84 x 120 mm
• Weight: 112g
* The LED indicator turns red under abnormal conditions.
Safety information
Please read below safety notes carefully before use to avoid any personal injury and property damage caused by
improper use of the product. Any warranty claims or returns caused by misuses will not be accepted.
• Do not place any magnetic strip card, such as credit card or phone card, and also passports and boarding pass on or
near the wireless charger. It may result in demaging in both the cards and the wireless charger.
• Do not place any object with conductive materials, such as metallic object or magnets, on the wireless charger when it
is connected to power source.
• The magnetic field from the product may affect medical implants. Keep a distance of at least 20 cm.
• Keep the product away from heat sources, direct sunlight, combustible gas, humidity and liquids.
• This device is not suitable for use by persons (including children) with reduced physical, sensory or mental capacities
unless they are assisted by a person who is responsible for their safety. Children must be under the supervision of an
adult when using, cleaning or maintaining the device.
• Do not attempt to repair, disassemble or destroy the product in any way.
• Do not operate a wet or otherwise damaged product.
• Unplug the product before storage or cleaning.
• Immediately stop using the product if you find it rapidly increasing in temperature, emitting odor, deformed, abraded,
or if it is showing an abnormal condition.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government
for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
Charging your wireless device
1. Connect the QS0A to a power adapter (not included) with the included
Micro-USB cable. The LED indicator flashes once when it is correctly
connected. (Fig. A)
2. Place your Qi-compatible mobile device on the wireless charger.
Charging will start when the charging coil of both the Qi device and the
charging pad are aligned. The LED indicator flashes when it starts
charging the device. (Fig. B)
3. Remove the mobile devices from the wireless charger once it is fully
charged.
Charging area
(Fig.A)
(Fig.B)
Micro-USB (Input)
LED Indicator
