Maintenance and Adjustment
Cleaning
-
Pay attention not to make scratches when cleaning the headlight and those plastic parts. Avoid
using high-pressure water spray where seals and electric components are, water seepage can cause
damage.
-
Make sure not to spray water to clean the following delicate parts : airbox, ECU, brakes, all electric
connectors, muffler hole, fuel tank cap.
-
First, rinse away the dust and remove dirts with water.
-
Mix the cleaning agent and water to the proportion, use soft clean cloth or sponge to gently rub
the bike.
-
Rince off with soft- or foggy-spray of clean water
-
Wipe with soft cloth to dry and see if all dirt is gone
-
Air blower is not recommended to dry your bike, it may cause flaws to the paint finished
-
Restart the engine at and run idle speed to warm up
-
Ride slowly after washing. Check both brakes by squeezing front and stamping rear brakes several
times to help dry the pads.
34
Содержание GPX Demon 150GR
Страница 43: ...Notes...
Страница 44: ...Notes...