GoWISE USA VIBE GW77722, Руководство пользователя

Страница: 10 / 24

REMOVABLE DOOR
SET UP AND USING MULTI AIR FRYER
BEFORE FIRST USE
1.
Unbox the Unit and place on a
countertop or flat surface away
from any water source and
near a polarized outlet. Before
plugging in the Unit, remove
accessories from the Internal
Heating Compartment. Unwrap
accessories.
2.
Rinse the accessories with warm
water and dry thoroughly. Place
the Drip Tray at the bottom of the
Internal Heating Compartment
and close the door.
3.
Plug in the Unit. Press the
POWER button to turn the unit
on. Press the TEMP/TIME button
and use the and arrows to
adjust temp and time settings to
5 minutes at 350°F.
NOTE:
This process will burn off
any remaining residue left from
the manufacturer. There may
be a slight burning smell but, will
dissipate after a few minutes.
4.
Your new GoWISE USA Multi Air
Fryer Vibe is now ready for use!
10
The door can be removed for
cleaning.
DO NOT
put the door in the
dishwasher, as water may seep into
the dual pane glass. Instead use a
sponge or cloth with a dash of dish
soap to remove grease and mess.
Gently rinse with warm water and dry
with a soft cloth.
To Remove:
The door opens to about
70°. Push the white button down and
move in the direction of the arrow
(as shown below), then pull the door
down to force it apart.
To Insert:
Align the shaft on the door
with the hole on the base and insert
the door at the angle of the below
figure.