SET UP AND USING AIR FRYER
BEFORE FIRST USE
1.
1.
Remove all packaging materials,
stickers, and labels.
2.
2.
Clean the basket, crisper tray,
and basket divider with hot
water, soap, and a non-abrasive
sponge.
3.
3.
Wipe the inside and outside of
the appliance with a clean cloth.
4.
4.
Set the unit to 350°F for about 5
minutes. This process will burn off
any remaining residue left from
the manufacturer. There may be
a slight burning smell which will
dissipate after a few minutes.
5.
5.
Your new
GoWISE USA Air Fryer
is now ready for use!
1.
1.
Place the air fryer on a flat and
even surface. DO NOT PLACE
THE AIR FRYER ON A SURFACE
THAT IS NOT HEAT RESISTANT.
2.
2.
Place the crisper tray in the
basket. DO NOT FILL THE
BASKET WITH OIL OR ANY
OTHER LIQUID.
3.
3.
Place the ingredients in the
basket and then slide the basket
back into the appliance. The LCD
display should light up.
4.
4.
Press the POWER/START
button and set cooking time and
temperature by either choosing
one of the 8 preset cooking
programs using the MENU
button or manually set time and
temperature with “ “ or “ “
arrows.
5.
5.
Once you have set the cooking
time and temperature, press the
POWER/START button again.
Four dots at the bottom of the
display will blink repeatedly. If the
four dots are solid, the cooker will
go into standby mode.
6.
6.
If you would like to make changes,
such as adding more time or
increasing the temperature,
press the PAUSE/RESUME
button to pause the cooking cycle
and make your changes using
the appropriate buttons. Once
you have made the adjustments,
press the PAUSE/RESUME
button to start the fryer again.
7.
7.
You may need to shake the
ingredients midway through the
cooking cycle. Pull the basket out
of the air fryer by the handle (the
8
USING YOUR AIR FRYER
NOTE:
DO NOT
fill basket with oil or
lard. The appliance uses rapid air
circulation to fry.
