6
Replace b
s when any of the following occur:
•
The
shows on display
•
The display dims
•
The display does not light up
CAUTION
•
Remove
eries from monitor if they will not be used for a long period of me.
•
Do not dispose of
s in
fire
. B
s may explode or leak.
•
Discard used b eries according to your local recycling guidelines.
•
Always use the correct type of
eries.
Oscillometric Measuring method
This product uses the Oscillometric Measuring method to detect blood pressure. Before every
measurement, the unit establishes a “zero pressure” equivalent to the air pressure. Then it starts
g the wrist c
uff
, meanwhile, the unit detects pressure
s generated by beat-to-beat
e, which is used to determine the systolic and diastolic pressure, and also pulse rate.
The device also compares the longest and the shortest
e intervals of detected pulse waves to
mean
e interval, and then calculates standard
. The device displays a warning signal with
the reading to indicate the d
n of irregular heartbeat when the
differenc
e of the
e intervals is
over 25%.
g date, me and measurement unit
It is important to set the clock before using your blood pressure monitor, so that a
e stamp
can be assigned to each record that is stored in the memory. (year: 2000 -2050)
1.
When the unit is off, touch "SET" briefly to turn on the set screen.
Then press and hold "SET" for 3 seconds. When the year flashes, go to next step.
