GoWISE USA GW22051, Инструкция по эксплуатации

Страница: 14 / 16

14
SPECIFICATIONS
PROBLEM SYMPTOM CHECK THIS REMEDY
No power
Low
Error
massage
Display is dim or
will not light up.
incorrectly.
Show on the display
E 1 shows
The cuff is not
secure.
Refasten the cuff and then
measure again.
E 2 shows
Refasten the cuff and then
measure again.
E 3 shows
The pressure of the
cuff is excess.
Relax for a moment
and then measure again.
The monitor detected
movement can affect the
measurement.Relax for a
moment and then measure
again.
Measure incorrectly.
Relax for a moment and
then measure again.
System error.
Retake the measurement.If
the problem persists,contact
the retailer or our customer
service department for
further assistance.
Refer to the warranty for
E 10 or
E 11 shows
E 20 or
E 21 shows
EE xx,shows on
the display.
Power supply
Display model
100 - 240V, 50-
(Use only the AC Adaptor provided with this product.)
powered mode:
6VDC, 4 x AA
AC Adaptor mode:
60Hz, 1000mA
Measurement mode
Measurement range
Digital LDC V.A. - 2.5” x 3.9” (61mm x 93mm)
Oscillographic mode
Pressure: 0- 40 kPa (0- - 300mmHg)
Pulse value: 40 -199