GOWIN RISCV Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 24

GOWIN RISCV Скачать руководство пользователя страница 15

3 Use Instructions for RDS

3.4 Download Programs to Flash

IPUG546-1.1E

9(17)

shown in Figure 3-4. After selecting the project to be exported,
compression format, save path, etc. you can complete the export.

Figure 3-4 Export a Project

3.4

Download Programs to Flash

AE250 supports starting from Flash, then reads the embedded

program from Flash via SPI interface and stores it in ILM, and then the
embedded program is executed. The recommended method is to reuse
SPI Flash that saves FPGA Bitstream; use the first half of Flash to save the
FPGA Bitstream, and the remaining to save the binary files of embedded
programs.

1.

Open the IP core generator in Gowin Software and call AE250 RTL
parameters. Double-click the SMU to open the SMU interface and set
"System Reset Vector Default" to 0x80400000, as shown in Figure 3-5.
Set the space of SPI Flash 0~0x400000 with a total of 4M bytes as the
save address of Bitstream; starting from 0x400000 is used as the save
address of binary files of embedded programs.

«
...
13
14
15
16
17
...
»

Содержание RISCV

























Отзывы:

Нет отзывов