GOWIN RISCV Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 24

GOWIN RISCV Скачать руководство пользователя страница 18

3 Use Instructions for RDS

3.5 On-chip Debug

IPUG546-1.1E

12(17)

Default in RTL design, as shown in Figure 3-8. Then modify config.h.
Open src/bsp/config/config.h, and find the macro definition
"BUILD_MODE" and modify it to "BUILD_BURN".

Figure 3-8 ae250.sag bootloader Parameters Setting

Note

！



The parameter should be consistent with the value of System Reset Vector Default of
the RTL parameter.



Modify the compilation settings; right-click the name of the embedded project, select
Build Settings; select "Objcopy > General" tab, and uncheck "Disable". (Do not
auto-generate output file.)

Recompile the embedded program to generate binary files of the

embedded project, and download the files to SPI Flash 0x400000 address
using Gowin Programmer external Flash C Bin mode.

Synthesize and place & route the modified RTL design again, and

download it to SPI Flash 0x000000 address using Gowin Programmer
external Flash mode.

3.5

On-chip Debug

After compilation, the compilation results of the embedded project can

be downloaded to the development board for on-chip debug.

Modify config.h; open src/bsp/config/config.h, and find the macro

definition BUILD_MODE; modify it to BUILD_LOAD, and recompile the
embedded program.

Right-click on the project name in the Project Explorer, and select

"Debug as > MCU Program "from the drop-down menu. For the first time, ,
a dialog box will pop up for setting "Debug Configuration", as shown in
Figure 3-9.

«
...
16
17
18
19
20
...
»

Содержание RISCV

























Отзывы:

Нет отзывов