EVAL-pSRAM-GW1NR4 Development Board Quick Start User Guide
TN428-1.0E
www.gowinsemi.com.en
4
(
6
)
2. Right click "Place & Route" in the "Process" window and select "Rerun
All";
Figure 4 Select Rerun All
3. After compilation, the following information will be displayed. The
generated bitstream file is saved in: ..LED_test\impl\pnr\LED_test.fs.
Figure 5 Compiling Completed
Download and Run
1. Connect the JTAG (J2) of development board with PC using the
download cable and switch on the power. Double-click on the "Program
Device" in the "Process" window. The "Programmer" window will pop
up. Right-click on the device list, and select "Configure Device". The
Device configuration dialog box will pop up.
