Installation instructions:
1. Prepare the device-‐ (CAUTION: In order to prevent damage to the SIM card,
please insert the SIM before powering on the device.)
•
Remove SIM card from its sleeve. If it has multiple sizes, remove the largest
one (Mini).
•
Remove cover from GPS tracker.
•
Slide the silver metal SIM tab back and then flip up. Insert SIM carefully
into the tracker. Flip tab back down and slide to lock. Make sure it is fully
locked into place.
•
Reassemble the cover.
2. Find a secure location to mount the GPS tracker-‐
•
Choose a secure location in the vehicle – either in the trunk or interior of a
vehicle. A common location is under the dashboard, this is both hard to
easily find and is good for GPS positioning.
•
Choose a location that is not next to electrical wires for the radio, alarm
systems or other RF devices. These devices can interfere with GPS location
data.
3. Connect the wires according to the installation sheet provided with the device.
4. Wait 5-‐10 minute for the unit to find the GSM and GPS signal for the first time.
Moving to an open area will decrease the time required to get a signal.
5. Setup the device-‐ (See below)
•
Set master phone number
•
Change user password
•
Set local time zone
•
Test location
Содержание CGV-50
Страница 1: ... CGV 50 GPS Tracker Manual V1 2 ...
