Govaerts Recycling NV | Kolmenstraat 1324 | B-3570 Alken | [email protected] | www.govaplay.com
2
For safety reasons, it is recommended to respect at least 10
cm between the top of the anchorage (concrete) and the
ground level. Required volume of concrete per table leg: +/-
0,15m³
The picnic table GP17b is to be anchored.
It has extended legs (40 cm longer) which need to be anchored into the ground using concrete or a sand-cement mixture.
Important suggestion
To drill the holes in the ground, use a sharp drill and just put the plastic plug
into the hole. It is better to screw the nail into the plug than to hammer. This
way, you don't damage the head of the nail and unfixing will be easy.
Anchorage on a hard and flat surface.
Screw the 4 enclosed brackets onto the bottom of the table legs and fix them into the ground by means of the nail plugs. It is
recommended to pre-drill the holes in the legs using a wood or metal drill bit of 4 mm. The holes into the surface need to be
drilled with a masonry drill bit of 8 mm.
