Gourmia GIC100, Руководство пользователя

Страница: 5 / 9

9 8
INDUCTION COOKER
PRODUCT SPECS
TROUBLESHOOTING
Note: Power mode is designed for cooking soup, boiling water. It is not recommend-
ed to stir and deep fry the food.
Note: Temperature mode is designed for stirring and deep frying and keeping soup
warm. It is not recommended to cook soup or boil water.
Cookware Selection
Compatible for use with: steel, cast iron, enameled iron, stainless steel, flat-bottom
pans/pots with bottom diameter of 4 3/4" to 10 1/4".
Note: Aside from the mentioned recommended pots, do not try to use other pots
instead. Aluminum pots will not work.
Note: Some stainless steel pots contain aluminum in their base and will not work
with induction cooking.
For all other pots:
• Pan/pot must be suitable for induction cooker use.
• Pan/pot should be tried out if it's purchased separately to check for damage/malfuc-
tion.
• Pan/pot should be flat and come with the cover and air vent.
INTR
ODUC
TION
T
O
THE
INDUC
TION
C
OOKER
INTR
ODUC
TION
T
O
THE
INDUC
TION
C
OOKER
Problem: Check point Solution:
Appliance fails to respond
after connecting to a power
source pressing power key.
Is the electricity off?
Is the fuse or circuit breaker
tripped?
Is the plug connected firmly?
Use after electricity re-
sumes.
Check the root causes care-
fully. If the problem cannot
be fixed, please contact
customer service for as-
sistance.
Heating is interrupted by
'beep' sound during normal
use.
Incompatible cookware, or
cookware removed?
Is the cookware not placed
directly at the center of the
heating zone?
Is the cookware being heated
but continuously stopping?
Replace compatible
cookware for the induction
cooker.
Place the cookware at the
center of the defined heat-
ing zone.
Place the cookware inside
the heating zone.
Heating stops or won't start. Is the cookware empty or the
temperature too high?
Is the air intake/exhaust vent
clogged or has dirt accumu-
lated?
Is the cooker working over 2
hours without any external
instruction?
Please check whether the
appliance is being misused.
Remove the the contents
clogging the air intake/
exhaust vent. Operate the
appliance again after cool-
ing down.
Reset cooking modes or use
timer fuction.
Error codes occur. EO Inner circuit error
E1 No pan or the pan isn't
suitable
E2 Device is overheated
E3 Input voltage is too high
E4 Input voltage is too low
E5 Top sensor open circuit/
short circuit
E6 IGBT sensor open circuit/
short circuit
E7 Top plate overheated
When showing error signal
E1, E2 and E7, please check
whether the cookware is
not suitable, or switch the
appliance on again after it
has naturally cooled down.
When showing E0, E3-E6m,
please contact customer
service for assistance.