Gourmet Maxx KA-6510, Инструкция по эксплуатации

Страница: 30 / 73

2.
06160_DE-GB-FR-NL_V1.indb 30
{g}
19.04.11 11:38
3.
4.
5.
6.
Press the Kneten button (knead). The cooking temperature is automatically set to 0°C and the motor speed
to 3. The displays shows the symbol C
^^B^.
Motor speed and cooking temperature cannot be changed in the "Knead" programme. Only the
preparation time can be set.
Preparation time: Press the Zeit button (time) once. The minutes display flashes. You can now set
the minutes with the + and - buttons. By pressing the button once, the minute display is increased or
decreased by 1 minute.
Press the Zeit button (time) a second time. The seconds display flashes. You can now set the seconds with
the + and - buttons. By pressing the button once, the second display is increased or decreased by 1
second.
The maximum preparation time that can be set is 90 minutes.
You can start the "Knead" programme without setting the preparation time. In this case the
appliance operates for 20 minutes and then stops automatically.
Start the appliance with the START/STOP button. The appliance starts working for 3 seconds and stopping
for 4 seconds. The preparation time that was set, starts counting down. If no preparation time was set, the
preparation time counts up.
When the appliance operates in the "Knead" programme, you can change the preparation time at
any time. By pressing the Kneten button (knead) again, the "Knead" programme is aborted and
the symbol C
|JJJJJJJJJJJJt>
disappears.
•
If the appliance was started with manually set
values for preparation time, cooking temperature and motor speed, then the "Knead" programme
can no longer be activated. The Kneten button (knead) is then deactivated.
After expiry of the set preparation time the appliance automatically stops. If no preparation time was set
before starting, the appliance automatically stops after 20 minutes. In both cases the appliance beeps ten
times and the symbol
<^^B>
in the display disappears. To switch off the appliance, place the
ON/OFF switch to O and pull the plug out of the plug socket.
Using the "Turbo" function
Ä
~~S
If you use the "Turbo" function for warm or hot foodstuff, the weight of the foodstuff in the food container
must not exceed 1 kg!
Very hard foodstuff and ice cubes can be minced with the "Turbo" function. In order to be
able to use the "Turbo" function, no preparation time, cooking temperature or motor speed
need to be set.
If a cooking temperature was set before starting, the "Turbo" function cannot be switched on
during preparation. The Turbo button is then deactivated. If a cooking temperature and/or motor
speed was set before starting, or if the "Knead" programme was selected, the "Turbo" function
can be switched on at any time during preparation. However, all previously set values are reset
to 0.
29
ATTENTION!