2
Rear Panel
1. Ground Screw:
It is used to reduce background noise & hum when using
multiple outlets to power audio equipment.
2. DC Power Input:
It is used to connect the power adapter to the AMP4. The
AMP4 is using DC 12V power supply.
3. Output 1:
It is used to plug in the headphone to the output channel 1. The
volume of Output 1 is controlled by the knob of Vol 1 on front panel.
4. Output 2:
It is used to plug in the headphone to the output channel 2. The
volume of Output 2 is controlled by the knob of Vol 2 on front panel.
5. Output 3:
It is used to plug in the headphone to the output channel 3. The
volume of Output 3 is controlled by the knob of Vol 3 on front panel.
6. Output 4:
It is used to plug in the headphone to the output channel 4. The
volume of Output 4 is controlled by the knob of Vol 4 on front panel.
7. Stereo Input:
It is used to connect audio devices to the AMP4 as input
sources by 1/4" TRS connectors. The input source will be distributed to all
the 4 output channels.
1
2
3
4
5
6
Specifications
Input Impedance:
100K Ohm(Unbalanced)
Max. Input Level:
+14 dBV
Input Connectors:
Stereo 1/4" TRS phone jack, L & R Mono 1/4" TS jacks
Output Impedance:
51 Ohm each output
Frequency Response:
20 Hz - 20K Hz
Max. Gain:
20 dB
S/N Ratio:
> 90 dB
THD:
< 0.08%
IMD(SMPTE):
<0.08%
Power:
DC 12V
7
Содержание AMP4
Страница 1: ...AMP4 Headphone Amplifier ...
