Gotting HG G-71915, Описание устройства

Страница: 58 / 66

Device Description HG G-71915ZA | English, Revision 01 | Date: 09.09.2021
58
Chapter 15 – Technical Data
15
Technical Data
Table 46
Technical Data Antenna HG G-71915-A
Antenna HG G-71915-A
Dimensions 160 mm x 80 mm (plus connectors) x 55 mm (B x T x H), see Figure 12
on page 26
Casing Polycarbonate
Effective antenna area 140 x 60 mm (functional area positioning)
Weight 450 g
Protection class IP 65
Reading distance 5 – 80 mm, depending on the transponder type in use, s. Table 47 on
page 59
(distance transponder - bottom side reading antenna)
Relative humidity 95 % at 25° C (without condensation)
Temperature ranges – Operation: -25° C to +50° C
– Storage: -40° C to +85° C
Supply vUB +18 VDC to +30 VDC, nominal v 24 VDC
Current consumption 130 mA @ 24 VDC
Operating frequency 128 kHz
Code length 16 Bit (Trovan™)
max. crossing speed 2,0 m/s
Repeat accuracy ±2 mm at 0.5 m/s with interference-free environment
Outputs – Via bus telegrams: Transponder code and PosiPulse
Profinet® or CAN, depending on the antenna variant
– Digital output: PosUB / 20 mA current source, configurable
duration
Connectors – 3x M12 circular connectors, pin allocation see section 7.2 on page
22
– ables for several
– interfaces available as Götting accessories (see section 3.1 on page
13)
Configuration Via USB service interface in connector X1, USB Virtual COM Por
EMC see Table 48 on page 59
Mechanical load capacity 5 g 11 ms / 2 g 10 to 55 Hz
Positioning accuracy ±3 mm on the center axis
Recurrence accuracy 2 mm
Programming duration ca. 30 ms