GotSat GS 1011, Руководство пользователя

Страница: 8 / 19

3. Select „Channel Scan“ and press the „OK“ button to enter
the Channel Scan menu.
4. Press „LEFT“ or „RIGHT“ cursor button to select Scan
mode, Scan Band and Channel No. and highlight „Search“,
then press „OK“ button to start channel scan .
TUNER SETTING
1. Press „MENU“ button to enter main menu .
2. Select „Installation“, press „OK“ button to enter Installation
menu,
3. Press „UP“ or „DOWN“ cursor button to select the „Tuner
Power“,
4. Press „OK“ and „Tuner Power“ option is highlighted. Press
the „LEFT“ or „RIGHT“ button to select the desired setting.
When selected „On“, the STB will provide 5V power to anten-
na. It will no provide when selected „Off“.
5. Press „EXIT“ button to exit.
CHANGING CHANNELS
There are four ways of channel selection - stepping th-
rough the channel list, selection by number, from the on-
screen channel list, and using the electronic programme
guide(EPG).
1. Stepping through the channel list:
To move through the channel list, press the upward arrow or
downward arrow key on the remote control.
2. Selected by number:
Enter the channel number directly by pressing numeric but-
tons ,and press the „OK“ button to select desired channel.
3. Selected by on-screen channels list:
You can also select the required channel directly from on-
screen channel list. This is displayed using the STB‘s main
menu. See „Channel List“ in this manual for operation
detail.
4. Selected by EPG:
You can also select the required channel directly from
electronic program guide (EPG).
This is displayed using the STB‘s main menu. See „Acces-
sing the Electronic Program Guide
(EPG)“ in this manual for operation detail.
► OPERATION
9