H. Installation Guide ( Based on the car mode will be designed)
1. Shut down the car engine.
2. Insert the TF card into the recorder card slot.
[Note] Please use a high-speed TF card (Class10). The TF card supports a
maximum of 512GB.
3. Connect the bracket to the host, and then fix the machine to the front windshield of
the car.
4. Connect one end of the installation cable to the machine, and then connect the
other end to the fuse box. Please connect as follows:
Black-GND
Yellow ---- B+ 12V (battery)
Red ---- ACC (+12V)
5. Install the rear camera on the back of the vehicle, pay attention to the direction
when installing. The wiring can be laid along the roof of the vehicle. After installation,
connect the rear plug to the rear camera interface of the recorder.
6. Adjust the lens position to ensure that the lens is level with the ground.
7. Start the engine and check if the machine is installed correctly.
[Note]
When the machine is installed correctly, the display of the machine is on; the
machine starts to enter the recording state, and the video icon flashes. Please pay
attention to check whether the picture on the display is normal. If the picture
displayed is inverted, please contact us in time.
