7
So the SMS command should be
“123456I1,1,1,51113525N009125670E50241115N011011173E”
123456I1,1,1,+first Latitude Lo second Latitude Longitude
18. Low battery alert
Send SMS “123456(N 0/N1),xx” to set the low-battery alert.
Note: N must be English in capital, N0 means turn off the low-battery alert function; N1 means turn on the low-battery
alert function. xx should be <45 and must be 2 numbers.
E.g. send“123456N1,30” to the tracker means when the battery is lower than 30%,it will send a alert to the
authorized number. Send“123456N0,30” to the tracker means turn off the low battery alert function.
19. Set the local time
Send SMS “time zone” to set the local time
Note: L must be English in capital, “+” in the time zone means EAST, “-“ in the time zone means WEST. Time zone
must be 2 numbers. So Beijing’s time zone should be like this: +08, Los Angeles’ time zone should be: -08
E.g. Send “08” to set the time to Beijing time.
Send “123456L-08” to set the time to Los Angeles time
20. GPRS setting
In order to use GPRS function, the user needs to set IP, Port and APN (access point name) by sending SMS commands.
Make sure that your SIM card in the tracker supports the GPRS function.
Send SMS “
123456C$$$$,IP:Port
” to set the APN, IP and port.
Note: C must be English in Capital. Please get APN from your local GSM operators and pay attention to the lower case
or upper case of those letters.
E.g. send SMS “123456CCMNET,119.112.101.91:7289”.CMNET is the APN of China Mobile, please set the APN of your
sim card’s APN.
Send SMS “
123456O&&&&, @@@@
” to set the username and password for GPRS, skip this step if there isn’t
username and password
Note:&&&& is the username and @@@@ is the password. O must be English in capital. This setting depends on
different providers. If the provider doesn’t need username and password for the GPRS, you do not need to send this
command.
