Here you can select the part of the selected preset, that you would like to get the sound from. As
soon as you touch one of the buttons numbered 1-4, the touch button will turn black, and the
parameters of that part of the selected preset, is copied to the destination part, that you selected on
one of the previous pages.
Feel free to try the 4 different parts.
If you would like to try the sounds from another preset, than the selected one, simply touch the
“PRS” button, and you will be taken back to the “COPY FROM” preset select screen.
When you have found the desired sound, touch “EXIT” in the upper right of the screen, to exit to
the Synth Blocks page.
When you are back on the Synth Blocks page, you can edit all the parameters of the copied sound,
just like you would on a sound that you had created from scratch. The part that you copied from,
will not be affected.
Remember to save your work. When copying sounds, the result is only held in the preset edit buffer,
so it is not permanent. To make it permanent, follow the instructions in the PolySpaze B manual, on
how to save a preset.
If you should regret, that you copied a sound, you can either:
-Select another preset, without saving this one, and select this one again.
Or:
-Go back to the copy menu, and select the part you just copied to, as both the source and the
destination. Then the sound saved in the FLASH memory will return.
