Gotharman Gotharman's Tiny LD, Руководство по обновлению

Страница: 6 / 41

6
On the Synth VCF pages, you will now find the Dual SSI2140 parameters.
On the top of the VCF pages, you will find 2 touch buttons, named “1” and “2”. Touch these to
switch between the settings for VCF1 and VCF2.
Since the settings for VCF1 and VCF2 are the same, only the settings for VCF1 will be explained
here.
Cut: 0 to 511. Adjusts the filter cutoff frequency.
Reso: 0 to 511. Adjusts the resonance of the filter.
Inp: 0 to 511. The audio input level for the filter.
Type: Selects a pre-programmed filter type, that can be adjusted using Adj1-4. Different filter
types can be selected for morph layer A and B, to make it morph between the filter types.
The pre-programmed filter types are: LPF4, LPF3, LPF2, LPF1, BPF1, BPF2, BPF3, B3_2, BPF4, B3L1,
B3L2, B4L1, H3L1, HPF3, APF3, A3L1, Not1, Not2, Dst1, Dst2, Dst3, Dst4, Dst5, Dst6, Free (design
your own filter type, by adjusting Adj1-4).
Adj1-4: -128 to +127. Adjusts the level of the filter block 1-4 VCA’s, to obtain different filter types.