Setup Instructions
Height Setting 1
Height Setting 2
1
Remove Solar Table from packaging.
2
Unlock the latches on either side of the handles.
3
Place Table on its side and unfold the Table’s top surface.
4
Secure the two side latches near the hinges, locking the Table top
in its open position.
5
Hinge the legs out from underneath the Table surface.
6
Lock the legs open by pressing each leg’s corner brace into its
straight position.
7
Set the table right-side up onto its legs.
8
Slide the legs up away from the Table surface, until the ball
detents pop into place.
9
To adjust the Table to the taller setting, press the ball detents in
fully, then slide the legs until the detents pop through the second
set of holes. (Do not extend past the second set of holes).
