3. Function & Operation Settings
3.1 Power supply - Multiple Power Sources:
•
Power bank - use DC adapter cord
•
Car battery - use DC adapter cord
•
Wall Outlet - use AC adapter cord
3.2 Power cable connection:
•
Connect the end of the adapter cord shown into the Chill’s cable port, locat-
ed on the side of the Chill.
3.3 Operation Settings:
•
ON / OFF: Plug in. Press the Power Button once to start the unit. Press the
Power Button again to turn the unit off.
•
Press the ^ UP or v DOWN buttons to adjust the target temperature. Press
the ^ UP button to increase and the v DOWN button to decrease the temp.
•
Press the Settings (gear) button to enter the economy running mode:
1. ECO (Energy savings mode)
2. MAX (Fast cooling mode) - factory default is MAX mode
3.4 Source Battery Protection Settings
•
By default the GoSun Chill is set to protect the Included lithium bat-
tery-based Power bank. This setting will not protect a 12V lead acid battery
in your car. Because of the differences in battery voltages, the GoSun Chill
has three different battery protection settings to help ensure that you can
always protect your power source from over-discharge. To change this
3
Battery Protection Level
ON / OFF
Temp. display
Set
Voltage
ECO / MAX mode
USB Port
UP / DOWN
setting, when the Chill is powered on and running, hold the settings button
until you see the display flash (H1, H2, or H3). Then use the up and down
arrows to change the setting for the battery being used.
• L: Protection for a standard 12V Lithium battery.
Low voltage cutoff: 9.6Vdc (12V) or 21.3Vdc (24V)
Reconnect Voltage: 10.9Vdc (12V) or 22.7Vdc (24V)
• M: Protection for a 12V lead acid battery when being used solely for portable
power. (when the battery is not required for other purposes like starting
your car, allowing you to use more of it’s capacity)
Low voltage cutoff: 10.1Vdc (12V) or 22.3Vdc (24V)
Reconnect Voltage: 11.4Vdc (12V) or 23.7Vdc (24V)
• H: Protection for a 12V car battery
Low voltage cutoff: 11.1Vdc (12V) or 24.3Vdc (24V)
Reconnect Voltage: 12.4Vdc (12V) or 25.7Vdc (24V)
3.5 Bottle Opener / Bungee Tie-Downs
•
The bottle opener is on the back of the Chill, in-between storage pouches.
There is a blue tie-down bar on the front of the Chill. To tie down objects,
clip one end of each bungee cord to the tie down bar loops. Stretch the
cords over top of the Chill, and clip the other ends into the metal loops on
either side of the bottle opener.
