manualshive.com logo in svg

Gossen MetraWatt SECUTEST SI+, Руководство по эксплуатации, Страница: 25 / 26

Поделиться
Скачать
Gossen MetraWatt SECUTEST SI+ Скачать руководство пользователя страница 25

GMC-I Messtechnik GmbH

25

11

Maintenance

11.1

How to Reset the SI Module

Should the SI module no longer react, e.g. due to incorrect operation, 
it must be initialized:

Ð

Pull the line plug of the test instrument and restart it. Stored data are 
preserved

or

Ð

If stored data are to be deleted at the same time:

Select the 

Setup

 menu and then the menu item 

Clear memory

.

Press 

 + 

 simultaneously.

Check the preset time after a reset!

11.2

Housing

No special maintenance is required for the housing. Keep outside sur-
faces clean. Use a slightly dampened cloth for cleaning. Avoid the use 
of cleansers, abrasives or solvents.

11.3

Device Return and Environmentally Compatible Disposal

The instrument is a category 9 product (monitoring and control instru-
ment) in accordance with ElektroG 

(German Electrical and Electronic 

Device Law)

. This device is not subject to the RoHS directive.

We identify our electrical and electronic devices (as of August 
2005) in accordance with WEEE 2002/96/EG and ElektroG with 
the symbol shown to the right per DIN EN 50419. These 
devices may not be disposed with the trash. Please contact our service 
department regarding the return of old devices, address see chap. 12.
If you use batteries or rechargeable batteries in your instrument or 
accessories which no longer function properly, they must be duly dis-
posed of in compliance with the applicable national regulations.
Batteries or rechargeable batteries may contain harmful substances or 
heavy metal such as lead (PB), cadmium (CD) or mercury (Hg).
They symbol shown to the right indicates that batteries or 
rechargeable batteries may not be disposed of with the trash, 
but must be delivered to collection points specially provided for 
this purpose.

0

Pb Cd Hg

Содержание SECUTEST SI+



























Отзывы:

Нет отзывов