GMC-I Messtechnik GmbH
7
3
Operation
Attention!
!
Only voltage-free devices under test may be mea-
sured!
Prior to each measurement, check mechanical
zero and full-scale deflection.
3.1
Inserting the Battery
Prior to starting the METRAmax 6, insert a 1.5 V mignon
cell into the battery compartment. This requires removal of
the lower part of the case.
Attention!
!
Disconnect the measurement cables from the
measuring circuit before opening the meter!
➭
Press the nose (5) on the rear of the meter inwards,
using an adequate tool, and remove the lower part.
➭
Insert a leakproof 1.5 V mignon cell according to IEC
R6 into the battery compartment (4), paying attention to
the polarity markings. Verify that reliable contact is
made.
➭
Replace the lower part of the case and press the two
parts together until they engage.
