16
GOSSEN METRAWATT GMBH
Menu Flowchart: Starting and Stopping the Ramp Sequence
9
Using the Menus – from the Initial InFO Menu to
Operating Parameters
Menu-driven operation via the initial
InFO
menu allows the
user to query online help and configure device parameters.
➭
The initial
InFO
menu is accessed by simultaneously
pressing and holding the
ESC|FUNC
and
ON|OFF
keys with
the instrument switched on until “
InFO
” appears at the
display.
➭
The display can be switched from the main “
info
” menu
to the other main “
set
” menu, and back to the “
info
”
menu by pressing the
#"
keys.
➭
After accessing the desired main menu, the associated
sub-menus are opened by activating the
↵
key.
➭
The desired parameter is selected by repeatedly pressing
the
#"
keys.
➭
Acknowledge with the
↵
key in order to change the cor-
responding parameter or parameters.
➭
After the desired digit has been selected with the
$
!
keys and the value has been adjusted with the
#"
keys,
the next digit is accessed with the
↵
key, or the display is
returned to the start menu or switched to the next sub-
menu.
➭
The calibration mode is started by repeatedly pressing
the
ESC
key until the simulator display appears.
➭
The calibrator is switched off by pressing and holding the
ON|OFF
key until the display goes blank.
The following pages include an overview of the menu struc-
ture.
ramp
set
start
ramp
ready
05
.
000
0-20
t2 run
#
"
+
#"
#"
Start
must
2x
mA
m A
Start
RAMP
ON
SOURCE
#"
Stop sequence: Display:
ho
(Hold)
Continue sequence: Display:
up
(up for rising slope)
dn
(down for declining slope)
run
(run fur sequence dwell time)
sequence.
blink.
ESC
#
"
+
2x
Stop the
ramp sequence.
ESC
during the sequence (run or hold):
Return to measuring or calibration function.
ESC
when stopped:
Return to sequence.
ramp
stop
↵
ESC
↵