10
GMC-I Messtechnik GmbH
2.2.8
LIST Subsystem
[SOURce:]LIST:CLEar
Initializes the list data of the present list.
Command Syntax: LIST:CLEar
Parameter: None
Example: LIST:CLEar
[SOURce:]LIST[:STATe]
Enables/Disables the list operation.
Command Syntax: [SOURce:]LIST[:STATe] <bool>
Parameter: On|Off
Example: LIST on LIST off
Query Syntax: [SOURce:]LIST[:STATe]?
Returned Parameter: <NR1> Value:0 for OFF, 1for ON
Related Commands: LIST:NUMB, LIST:CONT
[SOURce:]LIST:MEMO
Sets the Memo of the list.
Command Syntax: [SOURce:]LIST: MEMO “<aard>”
Parameter: “0x20-0x7f”
Example: LIST: MEMO “GMC”
Query Syntax: [SOURce:]LIST:MEMO?
Returned Parameter: <aard>
Related Commands: LIST:NUMB, LIST:CONT
[SOURce:]LIST:NUMBer
Sets the list number for the list operation.
Command Syntax: LIST:NUMBer <NR1>
Parameter: 0~6
Example: LIST:NUMB 2
Query Syntax: [SOURce:]LIST:NUMBer?
Returned Parameter: <NR1> 0~6
Related Commands: LIST:ADD, LIST:CONT
[SOURce:]LIST[:STEP]:ADD
Adds a new step. The values for each new step include operating
mode, load value, operating time.
Command Syntax: [SOURce:]LIST[:STEP]:ADD
<aard>,<NRf>,<NRf>
Parameter: CCL|CCH|CRL|CRM |CRH|CV, Digits |MIN|MAX, Digits
|MIN|MAX
Unit: None, Current Unit| Voltage Unit| Resistance Unit, s
Example: LIST:ADD cch,1a,1s
Related Commands: LIST:DEL, LIST:INS
[SOURce:]LIST[:STEP]:INSert
Inserts a new step at specified step.
Command Syntax: [SOURce:]LIST[:STEP]:INSert
<NR1>,<aard>,<NRf>,<NRf>
Parameter: 1~50,CCL|CCH|CRL|CRM |CRH|CV, Digits |MIN|MAX,
Digits |MIN|MAX
Unit: None, None, Current Unit| Voltage Unit| Resistance Unit, s
Example: LIST:INSert 2,cch,2a,1s
Related Commands: LIST:DEL, LIST:ADD
[SOURce:]LIST[:STEP]:EDIT
Edits one specified step.
Command Syntax: [SOURce:]LIST[:STEP]:EDIT
<NR1>,<aard>,<NRf>,<NRf>
Parameter: 1~50,CCL|CCH|CRL|CRM |CRH|CV, Digits|MIN|MAX,
Digits|MIN|MAX
Unit: None, None, Current Unit| Voltage Unit| Resistance Unit, s
Example: LIST:EDIT 2,cch,3a,1s
[SOURce:]LIST[:STEP]:DELete
Deletes one specified step.
Command Syntax: [SOURce:]LIST[:STEP]: DELete <NR1>
Parameter: 1~50
Unit: None
Example: LIST:DELete 2
Related Commands: LIST:ADD, LIST:INS
[SOURce:]LIST:CLEar
Deletes all steps for list operation.
Command Syntax: [SOURce:]LIST:CLEar
Parameter: None
Example: LIST:SAVE
Related Commands: LIST:CLE
[SOURce:]LIST:COUNt
Sets the cycle times (Count) for list operation.
Command Syntax: [SOURce:]LIST:COUNt <NR1>
Parameter: 0~65535
Unit: None
Example: LIST:COUNt 10
Query Syntax: LIST:COUNt?
Returned Parameter: <NR1>
Related Commands: LIST:NUMB, LIST:EDIT
[SOURce:]LIST:CHAIn
Sets the chained list for the present list.
Command Syntax: [SOURce:]LIST:CHAIn <NR1>
Parameter: 0~6|OFF
Example: LIST:CHA 2
Query Syntax: LIST:CHA?
Returned Parameter: <NR1>
Related Commands: LIST:NUMB, LIST:MEMO
[SOURce:]LIST:SAVe
Saves the list date according to the list number.
Command Syntax: [SOURce:]LIST:SAVe
Parameter: None
Example: LIST:SAVE
Related Commands: LIST:CLE
2.2.9
MODE
MODE
Sets the basic test mode for the load.
CC Mode CCL
CCH
CV Mode CV
CP Mode CPC
CPV
CR Mode CRL
CRM
CRH
Command Syntax: MODE <AARD>
Parameter: CCL|CCH|CRL| CRM|CRH|CV|CPC|CPV
Example: MODE CCL
Query Syntax: [SOURce:]MODE?
Returned Parameter: <AARD> CCL|CCH|CRL|
CRM|CRH|CV|CPC|CPV
