Careing Instructions :
To ensure your Slammo™ maintains a perfect circle over time, do not leave it out in the sun when not in use, as this
can cause the frame to warp. The sun can heat the PVC and if the net is on tight, it can possibly warp. Also make
sure to disassemble the set between uses to increase the longevity of the net and also the frame
(don’t leave it
assembled in a hot car)
. For replacement parts, please contact P&P Imports directly at [email protected]
and thanks for your support of Slammo™!
Assembley Instructions:
Slammo™ is easy to setup and only takes a few minutes. No tools are required.
1:
Insert the five pipe segments into legs to make a complete circle. Be sure the ridge of pipes are facing the ground.
2:
Separate each of the five clips on the pipe segments evenly, making sure each clip closest to the legs are placed
3:
To secure net,
wrap over
the pipe attaching the net to hooks underneath working your way around the circle.
4:
Continue attaching the net around the entire circle until your net is secured to all hooks. Adjust the tension as needed
against the legs.
so it is even and tight across the net.
The net must be very tight so the ball bounces correctly.
Still Confused? Visit
Facebook.com/PlayGoSports
For a step-by-step guide on how to
assemble Slammo™
Frame Setup
(Steps 1-2)
Net Setup
(Steps 3-4)
IMPORTANT
: NET MUST BE VERY TIGHT OR BALL WILL NOT BOUNCE CORRECTLY!
Slammo Set Includes:
•
(5)
Legs
•
(5)
Pipe sections with 5 clips each
•
(2)
Competition Slammo
™
Balls
•
(1)
Training Slammo
™
Ball
•
(1)
Carrying Case with net pocket
•
(1)
Slammo
™
Target Net
TM
1.
2.
3.
4.
