goSmarthome X1-3G-RC-101, Руководство пользователя

Страница: 23 / 28

710
711
Supervision for Door Sensor
：
Off
Supervision for Door Sensor
：
On
SMS reply you will receive:
Note! when this function is enabled, you will always be informed with control
panel beeping and text message to your phone if your garage door is left open.
User can force to arm it by pressing "arm"button again with 5 seconds.
Old Password#77
#New Password#
78#Exit Delay
Time#
Exit Delay Time (0~300sec): "***"S
79#Entry Delay
Time#
Entry Delay Time(0~300sec):"***"S
Password has been reset!
Note! The Exit/ Entry Delay Time is working for accessories in Single Delay Zone.
The alarm will be activated immediately when accessories in other zone are
triggered.Once entry/exit delay time is set, when system is armed, in case of
delay time less than 10 seconds, control panel will beep once every second.
While delay time more than 10 seconds, control panel will beep once every
2 seconds, the sound will increase in tempo for the last 10 seconds for
the "hurry up" notification.Once an entry is detected, it will allow the user to
enter and disarm the system within the programmed entry time.
712
713
Central Monitoring Station Setup
Report Upload On
Report Upload Off( Default)
Password#714#
User ID# User ID changed successfully!
1. Program User ID for Central Monitoring Station
Note! The user ID is the Central Station Account number, which should be
4 digits between 0 and 9.
2. Note! Report upload function is disabled as default. If the user needs to connect
the central monitorning station, report upload function should be enabled.
If enabled, notifies the central station by sending alarm report if alarm event
occurs from the security system.
Contact ID Event Code and Content
3401
1401
1132
1131
1100
1125
3456
Arm
Disarm
PIR Motion Sensor Alarm
Window/Door Sensor Alarm
Emergency call
Duress Alarm
Stay Arm
1137
1144
1140
1133
1384
1302
1301
Control Panel Tamper Alarm
Detector Tamper Alarm
Normal Alarm
24H Alarm
Detector Low Battery
Control Panel Low Battery
Control Panel AC Power Lost
Event Code Event Content Event Code Event Content
42 43
Supervision for Door Sensor