Gosafe G626, Руководство пользователя

Страница: 15 / 26

13
SPO:0 SPO;0 SPO
3.9
enable/disa-
ble over
Speed
0: Disable
1: Enable
Default: SPO;1
TPM
3.8
One Can set two modes. TPM is
the same as TPM0, these two both
are mode 0.TMP1 is mode 1.
30M: Data save interval, M is time
unit, it can be(5~900S), (15~59M),
(1~240H)
G: unloading mode, it can be:
"O"/close unloading
"G"/upload GPS data by internal
set, when there is no GPS, data
uploading based on base station
information "S"/data upload
based on base station information
T: data format, it can be:
B = Binary Format
T = Text Format
Default: TPM0;60S;G;B
TPM1;1H;G;B
Setting
uploading
TCP server
mode
TPM; 30M;G;T
or
TPM0; 30M;G;T
or
TPM1; 30M;G;T
TPM:30M;G;T
or
TPM1:30M;G;T
Remarks Reply Command Ctrl Word Description Sr.
8: open GSM module
on-demand. (Open conditions:
Getting LBS data, Uploading SMS
data. Uploading saved data
according to setting and alarm
occurred). Then upload all data.
Then close module.
Default: PSM:00
MTP:20;30;40 MTP;20;30;40 MTP
3.10
Movement
sensor
setting
The range of three
parameters is the same: that is: 1
~ 255.
"20": vibration threshold.
"30": vibration time. Unit is
second.
This parameter is used with
parameter 1 to judge whether
the vehicle status is shift from
stop to move. If the move sensor
vibrate over "parameter1" (20
times/second) and last for