Gosafe G606, Руководство пользователя

Страница: 19 / 30

Configuration Software User Manual
Hyperlink: the location’s format will be hyperlink.

Parameter 3
Data upload interval and voice monitor interval can be set. The value is 30~900S,
15~59M, 1~240H.
2. TCP Upload Mode 1 (TPM1): Same explain as the user upload0. This another user upload
mode to choose
3. TCP Upload Buffer (TUP): You can set the quantity of records in every packet. When the
records reach what you set, the device will upload the data automatically by the TCP
channel. Note you have to enable the TCP Upload Buffer firstly. The device will keep
uploading automatically once it reach on certain percent of 1kb, like 30% by the TCP
channel.
4. UDP Upload Mode 0 (UPM0): Same explanation like the TCP upload mode. The only
difference is that the upload channel changes to UDP channel
5. UDP Upload Mode 1 (UPM1): Same explain as the user upload0. This another user
upload mode to choose
6. UDP Upload Buffer (UUP): Same explain as the TCP Upload Buffer (TUP).
7. Upload By Distance (DIS): The device will keep uploading automatically once it reach on
certain distance by the TCP channel.
8. Upload By Angle Change (TRN): Enable and disable the angle change alert
9. Harsh Acceleration-GPS (SPD): Enable and disable the harsh acceleration-GPS. Select the
times and the speed. When the parameter get to the setting speed and for the setting
times. It will send alarm to software.