3
LUBRICATION
GORLITZ JETTERS SHOULD BE GIVEN THE BEST OF CARE. IF KEPT CLEAN AND LUBRICATED,
THEY CAN PROVIDE MANY YEARS OF TROUBLE-FREE SERVICE. THE FOLLOWING INSTRUCTIONS
SHOULD BE CAREFULLY OBSERVED AT ALL TIMES:
OIL OR GREASE ALL POINTS WHERE FRICTION EXIST BETWEEN TWO OR MORE MOVING PARTS.
GREASE ALL WHEEL AND REELS EQUIPPED WITH ZERK FITTINGS.
PERIODICALLY CHECK OIL LEVEL AT PUMP AND MOTOR.
OIL RECOMMENDATIONS ARE: SAE 30W NON-DETERGENT FOR ELECTRIC MODELS, SAE 30W
FOR GASOLINE ENGINES, AND MOBIL 1 15W-50 SYNTHETIC MOTOR OIL FOR GASOLINE POW-
ERED PUMPS AND GEARBOXES.
NOTE:
FOR ADDITIONAL LUBRICATION OR MAINTENANCE INSTRUCTIONS CONSULT YOUR PUMP
AND MOTOR MANUFACTURERS OWNER’S MANUAL.
MODEL AND COMPARISON CHART
HOSE SELECTION
GORLITZ HOSES ARE AVAILABLE WITH DIFFERENT PRESSURE RATINGS, DIAMETERS, LENGTHS
AND END FITTINGS. WHENEVER POSSIBLE, ALWAYS USE SHORTEST HOSE WITH LARGEST INSIDE
DIAMETER TO MAINTAIN PRESSURE AND WATER VOLUME.
NOZZLE SELECTION
GORLITZ NOZZLES ARE AVAILABLE IN BRASS OR STEEL WITH NUMEROUS AMOUNT OF JETS. NOZ-
ZLES MADE FROM BRASS MATERIAL SHOULD NOT EXCEED 1500 PSI OF PRESSURE. STEEL NOZ-
ZLES ARE RATED AT 4000 PSI OF PRESSURE. THE AMOUNT OF REAR JETS, WATER VOLUME AND
PRESSURE DETERMINES THE DRIVING FORCE OF THE HOSE.
NOTE:
REPLACE ALL WORN NOZZLES. A WORN NOZZLE WILL RESULT IN LOSS OF PRESSURE.
DROP HEAD
THRUST HEAD
LASER HEAD
CORNER HEAD
FLEX CORNER HEAD
ROTATING HEAD
MODEL
MOTOR
PUMP
PRESSURE
HOSE
PIPE DIA.
APPLICATION
GO 1500A
ELECTRIC JETTER
GO 1500
ELECTRIC JETTER
GO 2000
ELECTRIC JETTER
GO 3000
ELECTRIC JETTER
GO 3500
ELECTRIC JETTER
2 HP
2 HP
6.5 HP
13 HP
18 HP
2.1 GPM
2.1 GPM
3 GPM
4.5 GPM
5.5 GPM
1500 PSI
1500 PSI
2000 PSI
3000 PSI
3500 PSI
1/8” x 50’
1/8” x 50’
1/4 x 100’
1/8” x 50’
1/4 x 100’
1/8” x 75’
3/8 x 200’
1/8” x 75’
3/8 x 300’
1 1/2” TO 2”
1 1/2” TO 3”
1 1/2” TO 3”
1 1/2” TO 6”
1 1/2” TO 8”
TUBS
SINKS
SHOWERS
TUBS
SINKS
SHOWERS
TUBS, SINKS
SHOWERS
DRAINS
TUBS, SINKS
SHOWERS
DRAINS
TUBS, SINKS
SHOWERS
DRAINS
BALL NOZZLE
○
○
○
○
THE MODEL COMPARISON CHART PICTURED ABOVE SHOULD ONLY BE USED AS A GUIDELINE. ITS SUG-
GESTED APPLICATIONS MAY VARY DEPENDING ON SITE OF LOCATION, AGE, TURNS, MATERIAL AND
LENGTH OF DRAINAGE PIPE AND OPERATOR.
