background image

 

 

 

43-200 Pszczyna, ul. Staromiejska 31b 

tel. 032 

326 30 70

, fax  032 

447 73 30

 

www.gorke.com.pl

, e-mail: 

[email protected]

 

 
 
 

SPECIFICATION AND USER’s MANUAL 

 

type of the device: 1-channel ANT-KO1/1  set 

the set contains: a 1-channel RSU KO1 receiver and a 3-button PUK 303 remote control 

 

 

 

 

 

 

TECHNICAL PARAMETERS OF THE RECEIVER 

 

 

class: C 

 

type of receiving module: superreaction 

 

sensitivity: -100 dBm 

 

frequency: 433,92 MHz 

 

radio transmission: KeeLoq hopping code by Microchip 

Technology 

 

memory capacity: 14 

 

voltage supply: 

- nominal: 12 V DC 

- allowable: 10-15 V DC 

 

power consumption: 

- static: 17 mA 

- maximal: 40 mA 

 

capacity: 

- relay output: 1A/ 30 V DC 

- S transistor output: 0,5A/ 12 V DC  
- sabotage output: 50mA/ 12 V DC 

 

number of relays: 1 

 

relay's operating mode: mono or bistable 

 

time scope for the mono mode: ~1s-4min20s 

 

operating temperature range (°C): 0 to +40 

 

dimensions (mm): 48*68*26 

 

cooperation: any GE sender 

 

operating range (m)*: 100-500 

 

colour: white 

* the range depends on the type of the sender

 

                                          

 

TECHNICAL PARAMETERS OF THE REMOTE CONTROL 

 

 

class: C 

 

frequency: 433,92 MHz 

 

transmission: coded (KeeLoq hopping code by Microchip 

Technology) 

 

number of buttons: 3 

 

sending power: <5mW 

 

power supply: 1 battery 9V/GF22 

 

dimensions (mm): 123*35*20 

 

colour: black 

 

cooperation: any GE receiver 

 

operating range (m):  

with superreactive receiver: 300 

with heterodyne receiver: 600 

 

The operating range of the set is 300 metres. It concerns the open space (without any obstacles, when the 
receiver and the remote control can “see each other”). If there are any obstacles between the receiver and the 

sender, one must assume that the range would be reduced: for wood and plaster it would be 5-20% lower, for 

bricks 20-40% lower, and for reinforced concrete 40-80% lower.  

If there are many obstacles we advise to configure the sets using the receivers of the SH class, to use 

retransmitters or stronger remote controls. If there are metal obstacles, using the radio systems is not 

recommended.  

 

The device meets the requirements of the directives EMC 89/ 336/ EEC and 

RTTE 1999/ 5/ EC. 

 

 

Gorke Electronic Sp. z o.o. 
SPECIFICATION AND USER’s MANUAL: 1-channel ANT-KO1/1 set                                                               strona: 1

 

Отзывы: