17" x 40"
TOY CHEST LID
TOP SIDE
OF LID
1/2" DIAMETER X 22" LONG ROPE
INSIDE THE LOOP
SHOULD MEASURE
LESS THAN 3-1/2"
VERTICALLY.
STEP 3: LID
1: LOCATE THE 17" X 40" TOY CHEST LID AND TWO 1/2" DIAMETER X 22" LONG PIECES OF
ROPE.
2: PUSH THE ENDS OF THE ROPE THROUGH THE HOLES IN THE TOP OF THE LID.
3: TIE A KNOT IN EACH END ON THE BOTTOM SIDE OF THE LID.
4: GRAB THE ROPE IN YOUR HAND AND MAKE SURE THAT IT CANNOT WRAP AROUND
YOUR HAND. IF THE ROPE WRAPS AROUND YOUR HAND THEN RE-TIE THE KNOTS ON THE
BOTTOM UNTIL IT DOES NOT WRAP AROUND YOUR HAND.
TIE A KNOT IN THE ENDS OF
THE ROPES
TIE A KNOT IN THE ENDS OF
THE ROPES
!WARNING! - THE TOY CHEST IS NOT A TOY. IT IS A TOY STORAGE CONTAINER.
ALWAYS OBEY THESE SAFETY WARNINGS AND THOSE MENTIONED PREVIOUSLY IN THIS MANUAL:
*DO NOT ADD ANY ADDITIONAL HARDWARE TO THE LID.
*DO NOT PLACE OBJECTS ON TOP OF THE LID WHILE THE LID IS ON THE TOY CHEST.
*DO NOT PLACE OBJECTS ON TOP OF THE LID WHEN THE LID IS OFF THE TOY CHEST.
*DO NOT SIT ON TOP OF THE TOY CHEST.
*DO NOT STAND ON TOP OF THE TOY CHEST.
*DO NOT JUMP FROM THE TOP OF THE TOY CHEST.
*DO NOT STAND, JUMP OR HIDE INSIDE THE TOY CHEST.
