background image

Page 4

Limited Manufacturers Warranty

The “seller” warrants this product to be free from defects in workmanship and materials, under 

normal use and conditions at its original installation, for one year.

Cosmetic defects or natural defects of wood (e.g., warping, seasonal checking or cracking, 

knots, or knot holes, etc.) that do not affect the structural integrity of the product are not covered 

by this warranty. Defects that develop because the product is exposed to extreme climate 

conditions, excessive  water exposure, lumber that has been damaged by wood boring bees, or 

defects that develop as a result of faulty or improper installation of the product, are not covered 

by this warranty. Fading or discoloration or molding of any wood parts are not considered 

defects in material as long as they do not affect the functionality or structural integrity of the part 

or component.

It is the owner’s responsibility to properly maintain the product. Imperfections or defects that 

develop because of a failure to properly maintain the play set are not covered by this warranty.

The “seller” will repair or, at its discretion, replace any part within the stated warranty period 

that is defective in workmanship or materials. This decision is subject to verification of the 

defect, which, at the “seller’s” discretion, may be accomplished by submitting photographs or by 

delivery of the defective part to the “seller”. Any warranty claim must include proof of purchase, 

including the date of purchase.  In addition, within the first 30 days from the date of purchase, 

the “seller” will replace any parts discovered to be missing from or damaged in the original 

packaging.

This warranty is valid only if the product is used for the purpose for which it was designed and 

installed at a residential, single-family dwelling. This warranty is void if the product is used 

in a commercial or institutional setting. This warranty does not cover (a) products that have 

been damaged by acts of God, negligence, misuse, or accident, or that have been modified or 

repaired by unauthorized persons; (b) the cost of labor; or (c) the cost of shipping the product, 

any part, or any replacement product or part.

The “seller” DISCLAIMS ALL OTHER REPRESENTATIONS AND WARRANTIES OF ANY 

KIND, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

PLAYNATION WILL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 

DAMAGES. This warranty is valid only in the United States of America, is nontransferable 

and does not extend to the owners of the product subsequent to the original purchaser. Some 

states do not allow limitations on implied warranties or exclusion of incidental or consequential 

damages, so these restrictions may not be applicable to you. This warranty gives you specific 

legal rights. You may also have other rights which vary from state to state.

4

Содержание 04-0019




















Отзывы: