All of the drawers pull out so bottles can be more
easily added or removed.
Any of the drawers can be removed to store larger
bottles.
To remove:
1. Pull the drawer out to the STOP position.
2. Push the tab on right drawer guide down while
pulling the tab on left guide up, and pull the
drawer out.
To replace,
insert the sides of the drawer back into the guides
and push until the tabs snap into place.
Make sure the tabs on the drawer guides
are fully engaged before loading any
bottles. Pull the drawers out all the way
to the STOP position and push back in
several times to make sure tabs snap into
place.
8 necked bottles can be loaded into each of the
fi
ve top drawers, provided that the necks are
alternatively turned to the front and vice versa.
6 necked bottles with necks turned to the rear side
of the appliance can be loaded into each of the two
bottom drawers.
Altogether, you can load 52 bottles (0.75 l).
Tall bottles should not be loaded on the bottom
drawer because they may prevent the door from
closing.
Tab (push tab down on right
drawer guide, pull tab up on left
drawer guide)
13
Pull-out drawers
Insert wine bottles
Содержание XWC660E
Страница 1: ...Instructions for Use Wine Store...
Страница 23: ......
Страница 24: ...VC 166 E en 10 14...