Gorenje WCIU2090A1, Подробная инструкция по применению

Страница: 15 / 60

15
• Press and hold the power button
A
for approximately 4 seconds to
switch the wine cooler on.
• Press and hold the power button A for approximately 4 seconds to
switch the wine cooler off.
Note!
The adjusted temperatures of the upper and lower compartments are linked to
each other. Some combinations of settings are not possible.
TO SWITCH THE POWER ON/OFF - ALL MODELS
• Unlock the control panel, as per page 14, if necessary.
• Press the
C
or
D
buttons until the required temperature is
shown on the display.
• The display flashes when temperature adjustment is active or a
different temperature is being set.
TO CHANGE THE TEMPERATURE - ALL MODELS
• The appliance will work continuously until it gets to the correct temperature.
Continuous noise from the compressor and refrigeration system is normal.
• If the appliance is switched off, you should allow five minutes before switching
it on again to prevent the risk of unnecessary damage to the compressor.
• The LED display may not show the selected temperature whilst the appliance
first gets to the correct temperature. This is normal, and the display will be
corrected automatically once the appliance has run for a few hours.
• Unlock the control panel, as per page 14, if necessary.
• Press the button F . The 'active' display will flash.
• The temperature range for upper zone is from 5°C to 12°C (left
display) and for lower zone from 12°C to 22°C (right display).
TO CHANGE THE ZONE CONTROL - WCIU609BA2