Gorenje W6523/SC, Подробные инструкции

Страница: 28 / 52

28
392477
To improve your washing results we recommend 2/3 load on
Cotton programs.
Program: Max. load Type of laundry Possible combinations
Perfect Black
30 °C
2,5 kg/ 2,5 kg/
2,5 kg/
2,5 kg
2 kg"/ 2 kg"/
2 kg"/
2 kg "
Dark laundry using special-
purpose detergents for black
laundry, with gentle tumbling and
lower spinning rates • spinning
• pump stop
• normal
Ultra White
30 °C
2,5 kg/ 2,5 kg/
2,5 kg/
2,5 kg
2 kg"/ 2 kg"/
2 kg"/
2 kg "
Delicate, slightly soiled laundry
like bras, lace underwear, using
special-purpose detergents
for white delicate laundry... for
washing at low temperatures
with gentle tumbling and lower
spinning rate. • spinning
• pump stop
• normal
Partial programs these are independent programs. Use them when you feel you do not need the
entire washing program. Before selecting a new program, the washing machine
has to be switched to "OFF" position for 1 second). Decrease spinning speed by
pressing the (4) key.
Rinse
rinsing of the laundry (including hand washed laundry) without spinning
between the rinsing cycles, with one final spinning cycle.
"Extra water" can be selected by pressing the (6b) key.
Softening
for softening, starching, or impregnating previously washed laundry. It can also
be used as a short rinse, but without adding any conditioner.
It is completed with an additional rinse.
"Extra water" can be selected by pressing the (6b) key.
Spinning/
Pumping
for spinning the laundry.
If you wish to pump out the water from the machine, without spinning, then
press the (4) key several times to decrease the setting to
(Pumping).
"Data for SLIM
Favourite Wash 1
To store a program, that you have customized. First, select the program
(rotate the program selector dial to the desired position) and adjust the
settings as desired.
To save, press and hold the (6a) and (7) keys. The display will read
P1
and an acoustic signal will be emitted.
The program will remain stored until you change it with the same
procedure.
Favourite Wash 2
To store a program, that you have customized. First, select the program
(rotate the program selector dial to the desired position) and adjust the
settings as desired.
To save, press and hold the (6b) and (7) keys. The display will read
P2
and an acoustic signal will be emitted.
The program will remain stored until you change it with the same
procedure.