Gorenje W6222/SUK, Подробные инструкции

Страница: 17 / 52

17
WATER INLET CONNECTION
350135
Insert the gasket with a filter net into the
straight inlet hose attachment nut and
screw the nut onto the water tap (with
some models, the gasket with filter net is
already fitted and any additional fitting
into the nut on the straight attachment is
not required).
To ensure correct operation of the appliance, water pressure
inlet must be between 0,05 and 0,8 MPa. Minimum water
pressure can be established by measuring the quantity of
poured out water. 3 litres of water must be poured out from
completely opened tap in 15 seconds.
If your model has connections for both hot and cold water,
then connect one hose to the cold water supply (blue wing
nut or blue mark on the hose) and the other one to the hot
water supply (red wing nut or red mark on the hose), as
indicated on the back wall of the appliance (letters C and H)
(C - cold; H – hot).
Hot water (a mixture of hot and cold water) is added only on
the programs of 60° or more.
The inlet hose should be tightened manually (max. 2 Nm),
firmly enough to prevent any leaks. After tightening the hose,
check for any leaks. Use of pliers, wrenches, or other similar
tools is not allowed when installing the hose, as these tools
can damage the nut thread.
A
B
C
A
AQUASTOP
B
TOTAL AQUA-
STOP
C
REGULAR
ATTACHMENT