Gorenje VCK 1602 ECO, Инструкция по эксплуатации

Страница: 22 / 42

21
•
Do not use a vacuum cleaner on the site.
Absorbed building material can damage
your appliance.
•
During use keep the suction tube, suction
hose and nozzles away from your head to
prevent injuries.
•
For longer use pull out at least 2/3 of the
cable length to avoid overheating and
damage.
•
When you are using a vacuum cleaner for
several hours together, pull the connecting
cable to the end.
•
The appliance fulfils the applicable German
and European electrical standards as well
as the radio interference suppression
regulation.
CAUTION:
Never use the vacuum cleaner without the
filters.
Vacuum cleaner use only for home and in the
inner rooms!
Do not use a vacuum cleaner in very dirty
places, it will immediately obstruct HEPA
filter!
Connection to the mains
supply
Check, please, whether the voltage stated on the
data plate comply with the data of your house
mains supply.
Supply cord
If the supply cord is damaged, it must be
replaced with the suitable cord, or a set for
coiling the cable, which you can get in the
nearest Gorenje’s service outlet.
Data on compliance with
european standards
Test for this type of appliance confirmed that it
complies with the following European directives:
•
73/23/EEC Low voltage
•
93/68/EEC CE Marking
•
89/336/EEC Directive on Electromagnetic
Compatibility– EMC
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment
(WEEE). This guideline is the frame of a
European-wide validity of return and
recycling on Waste Electrical and
Electronic Equipment.
Elimination of the appliances
and environment
If one day you decide to change your appliance,
or you just do not need it any more, think about
the environmental protection.
Vacuum cleaner assembling
Always remove the plug from the power supply
before fitting or removing accessories. Before
putting the appliance into service, please check if
all filters are inserted correctly.
ASSEMBLY OF THE SUCTION HOSE
•
Insert the flexible suction hose into the
connection opening at the top of the
housing until you can feel it lock.
HOSE REMOVING
•
To remove flexible hose from the vacuum
cleaner, press the buttons situated on the
flexible hose base, then pull to remove it
from the attachment point.
ROLLING THE CABLE OUT AND UP
•
Pull out the cable to such a length that easy
working is ensured. Now connect the
appliance to the main supply. Press the
switch to activate the automatic rewinder
and hold on the mains plug for safety
reason.