Gorenje SVK61SS Скачать руководство пользователя страница 8

134422

When automatic cooking mode is activated the hotplate will 
operate at maximum power for a limited period of time and 
then automatically switch to the reduced power level to resume 
cooking (see chart). It may be switched on in any of the hotplates 
for all power settings except for setting “18” where power is set at 
maximum all the time.
 
Automatic cooking mode is activated on any idle hotplate.
•  Select a particular hotplate - power indicator displays 

fl

 ashing 

“00”.

•  First touch of the slide sensor (D) must be to the extreme right. 

Display indicates power setting »18« and the decimal dot (•) 
signals that automatic cooking mode is on.

•  Further touching of the slide sensor selects the desired power 

setting (17...1) for cooking.

•  Decimal dot is on during the entire automatic mode period.

Once the time from the chart below expires, the function is 
switched off and the decimal dot disappears.
You can also switch the automatic cooking mode off anytime by 
bringing power setting to “0”.

Power setting 
to continue

1

2

3

4

5

6

7

8

9

10 11 12 13 14 15 16 17

Maximum 
power cooking 
time (in sec)

60 80 120 165 200 250 280 320 360 410 200 80 100 160 160 160 165

Automatic fast cooking mode is suitable for...

•   Cold dishes at the commencement of cooking, then heated 

quickly at high cooking power, and then continued at reduced 
power, without having to monitor the process all the time (for 
example cooking stewed beef).

Automatic fast cooking mode is not suitable for...

•  Frying, roasting, or stewing, where food has to be turned, 

stirred, and monitored in general;

•  Dumplings or noodles, requiring lots of liquid;
•  Dishes requiring long boil in high pressure pot.

29

Automated cooking 
mode 

Содержание SVK61SS




















Отзывы: